Will a 10" off a '99 F350 fit on an '03 F350?

[Skwurlz]

Will a 10" suspension Lift kit for a '99 7.3 Superduty bolt onto a '03 F350 6.0 Superduty?


I have a line on a used kit cheap, guy's putting his truck back to stock to trade it in.


TIA, Travis

[platinum01]

should be the same kit for both trucks, may have different blocks for the rear, but mostly the same, just be sure to get everything. u-bolts, brake lines, driveshaft spacers, hanger kit and any steering mods he may have. good luck

[pwrstroke6john]

yea there the same.

[slowleak]

Originally Posted by platinum01

should be the same kit for both trucks, may have different blocks for the rear, but mostly the same, just be sure to get everything. u-bolts, brake lines, driveshaft spacers, hanger kit and any steering mods he may have. good luck

with 10 inches of lift it is more than likely just springs. then you will need track bar bracket, pitman arm, and carrier bearing spacers. that should be about it.

[mxchase]

it may work...i know in 05 they changed the front end suspension and controls..i can turn in a 12 foot tighter circle then my friends 03 haha

[mattymx]

My freind and I swapped out a lift from a 2000 F350 to his 2003 F350 with a 6.0. Everything was the same and it worked perfectly. Just make sure you get all the right parts.

[Abrannan19]

yes..everything is the exact thing. suspensions did not change until 05

[Dieselboy]

The early 99s had a few minor differences.

[moose99ps]

Originally Posted by Dieselboy

The early 99s had a few minor differences.

ding ding ding we have a winner!!! if its an early 99 the holes on the trackbar is smaller than that on the 99.5 and later. its an easy fix if you have a good drillbit and drill otherwise everything will bolt up... maybe with a few little diffrences. you dont need a trackbar... i havent had one on my rig for about 4months

[Skwurlz]

What other differences are there? I don't want to buy this kit and get screwed when I go to install it. I have access to all the tools and machines I would need, but would love to have it planned out before instead of figureing it out while installing.