|
|
#1
07-06-2009, 10:54 PM
|
||||
|
||||
|
Snow Performance water meth
I will never, NOT have this on my truck again!!!!!!!!
Just completed a VERY heavy tow with my setup, (not ideal for towing, 190 injectors, and Beans Turbo wheel), and I love this kit. I literally could not have made it without the water injection. No BS! I don't get blown away very often, but I will have a Snow performance water/meth Kit on any vehicle I own from here on out. I knew I was going to have a hard time with EGT's pulling a loaded trailer up the mountains in So Cal, and was looking for a way to help out. Matt Snow at Snow Performance had sponsored a kit for my race truck, so I called him up and asked if it would be ok to use this kit on my truck for the tow then replace it in the race truck afterwards. He said no problem, and was confident his kit would do just what I needed. He was right! Towing my 24' empty car hauler to California from Austin, I saw 1100* EGT's the whole 1300 miles. Scared the crap out of me. Got to San Diego, installed the boost cooler, loaded the trailer, "very heavy", and towed it back and never saw over 1000*. Needless to say, I was/am impressed, and a water/meth junkey for life. I highly recommend it if your looking for cooling. I know it helped my mileage, as my mileage was identical loaded vs. unloaded, and the trailer was packed full.
__________________
03 F-250 6.0 Enough done to it. 
|
|
#2
07-06-2009, 11:52 PM
|
||||
|
||||
|
Re: Snow Performance water meth
I have said it before, Water injection was by far one of the best mods I did to my trucks. There is something to be said about turning a switch and watching the EGT's stop moving or go down while pulling a hill.
Good to hear!
__________________
01 F-250 SC PSD,160,000m,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, GTS Hybrid injectors, Studs, 910 Valve springs, Forged rods Water injection,DP F-5, MBRP 4" dual's, Aero, 6" tip's, 100 axl tank, 4" Revtek lift, 37-14.50-17 TOYO MT's 469hp and 1068tq... ISSPRO PERFORMAX GAUGES
|
|
#3
07-06-2009, 11:57 PM
|
||||
|
||||
|
Re: Snow Performance water meth
I agree 100%
|
|
#4
07-07-2009, 12:42 AM
|
||||
|
||||
|
Re: Snow Performance water meth
hmm, Maybe I should Install my kit then.... not doing much use sitting in the box down inthe basement.
__________________
1994.5 F350 CC Long Box 7.3 238cc's new 5spd,Rebult t case, 1 pce fly, Coolmist 2 stage h2o. Ladder bars, 4" SS exh, hypermax IC, IDM mod, TS chip 385rwhp. 89 F250. Modded EFI Gas SBF, (Avatar) ZF to Auto conversion in progress.
|
|
#5
07-07-2009, 01:50 AM
|
||||
|
||||
|
Re: Snow Performance water meth
Are you running all water?
__________________
2000 Black Excursion: BTS, '05 CR Cummins conversion, F1 springs, F1 cam, II silver 64, ARP 625's, Smarty, and Airdog2.....for now 
|
|
#6
07-07-2009, 01:57 AM
|
||||
|
||||
|
Re: Snow Performance water meth
I have their stage 3 max setup and I agree... it is top top notch.... absolutely amazing the difference it makes... SNOW PERFORMANCE IS THE SCHIT
And I am only running 30% meth to water... I cant wait to try out the 50% mixture
__________________
-Bill  
|
|
#7
07-07-2009, 03:32 AM
|
||||
|
||||
|
Re: Snow Performance water meth
Just be careful with how much meth you put in the tank. I believe 50% is the max they want you to go. I stay way under that with mine because I just use it to keep it cool. I agree with you all, it does an amazing job at keeping egt's low.
__________________
2004 Ford F-350 6.0L PSD standard cab. Go-Go parts: SCT tuned by ID, DiPricol quad guages, silverline 4" TB no kitty or muffler, ARP studs (done by me with CAB ON) RCD egr delete, home made traction bars, full air ride, snow performance stage III, zoodad, intake elbow, airaid intake, FASS 150/180, mild FICM, II hybrid turbo.
|
|
#8
07-07-2009, 03:41 AM
|
||||
|
||||
|
Re: Snow Performance water meth
yeah I mainly use it for EGT's and a little power right now, but when I run at the track or on the dyno, Im running the 50% mixture that I got direct from Snow... Boost Juice is what they call it and its actually 51% water and 49% meth...
|
|
#9
07-07-2009, 04:31 AM
|
||||
|
||||
|
Re: Snow Performance water meth
I used a 50-50 blend the first time, then went with straight water for the tow.
|
|
#10
07-07-2009, 04:34 AM
|
||||
|
||||
|
Re: Snow Performance water meth
I am also getting that CFM+ intake manifold with the ports already in it... so I am going to see if those help any
|
Linear Mode
