![]() |
![]() |
|
|||||||
| Register | Members List | Timeslips | Calendar | Sponsors | Becoming a Sponsor | Mark Forums Read | Auto Escrow | Auto Loans | Insurance |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Rough Country Sus lift opinions
I have run their lifts on a few of my Jeeps with success. Didn't know how their springs held up on the bigger trucks. I've got a 250 standard cab, 4x4.
Any opinions would be helpful. Looking for around 4in to fit 35's
__________________
1996 F250 XLT Std. Cab, DIY intake w/ open elemnt cleaner, EPBV mod., 203 t-stat, Warn hubs, 285's on stock steelies with caps. ![]() 2001 Excursion Eddie Bauer, 4" Procomp lift, 315/75/16 BFG's on factory 5-stars, Green CAI, Magnaflow 5", Superchips downloader
|
| Sponsored Links | |
Advertisement |
|
|
#2
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
I have a 4" rough country on my PSD and I put one on my old 93 351, I have 315s under mine Im sure you could clear 35s, cant beat the price. Its a rough ride, if I had to do it over again I wouldve left it at an add-a-leaf kit but thats just because Im tired of climbing in and out of it.
__________________
97 PSD 34 470hp/940tq, FFD, BDP, TW, RockinSPerf, Tymar, Stealth Oil, modded H2E, 230 cc a codes studs&springs, dual 4" exhaust, 7.3 IC, gauges, TC LU,TC/shiftkit, Family rig:02 7.3 Excursion tymar intake, 4"mbrp tb, evo 2 |
|
#3
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
their name says it all ROUGH. you get what you pay for
__________________
I am probably the most hated person on here, and I don't care 97 CCSB 4WD DRW 7.3 5spd DP Tuner, 6637, Flo-Pro SS Exhaust, 99 I/C, T500, Autometer gauges, Valair Organic clutch, PFM 2.25" RSK, SD springs Front/rear 315/75/16s,
Bunch of other trucks |
|
#4
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
i got a 4" superlift it's not bad on the bumps but when you hit a washout goin cross country you'd wish they were stiffer!
__________________
--------------------------------------------- 02 f-350 4x4 100,000 miles, 4" superlift + dual steering stabalizer,Warn premium hub lockers, 4" downpipe 5" stacks, Ts 6pos chip ,triple pod gauges,pioneer deck,alpine amp,2 10" kickers, CCV, Airraid, runnin stock rims 33" bfg all terrains |
|
#5
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
roughcountry lift kits are made by superlift. most of the kits i get have superlift stickers on them.
__________________
'96 f-250, auto, shackle flip, solid axle, rsk, high/crossover steering, 3.73's, true trac's front and rear, trac bars, gt4202, 7.3 ic, idm mod, ccv mod, A1000, 4-line DIY Gen3, dual ipr's, casserly 350/200's, arp studs, 910's, pushrods, elec. fan, 2-stage nitrous, fluidampr. http://community.webshots.com/user/u...host=community[SIGPIC][/SIGPIC] |
|
#6
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
they suck dont waste your money, i have a 2.5" kit on my truck and cant wait to get rid of it
|
|
#7
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
what is wrong with the 2.5" kit from them? also is rough country and tuff country the same kit?
__________________
2000 f250 ECSB, 4x4 7.3 zf6, 150k miles Php hydra w/ php tunes and gearhead, 4" exhaust, stock turbo(ww2, turbomaster wastage actuator, gutted ebpv), FRX, unlimited 160/30 sticks SB 1939-CB single clutch, home brew water setup.... |
|
#8
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
Hows the other OBS kits out there for ride quality? I've been trying to decide on the kits myself...the same setup as mentioned above (4" on 35's)
__________________
1995 F250 7.3 SCLB 4X4 Auto, D60, Efuel, MBRP Turbo-Back, Tymar Intake, Autometer Gauges, Recon Cab Lights, 05 SD Steering Wheel Looking for an OBS rear sway bar |
|
#9
|
|||
|
|||
|
Re: Rough Country Sus lift opinions
Any lift for a OBS will suck its just the front spring thats the problem. Doesn't matter where you get the springs or if it just a RS kit lift. The only way to lift and have a good ridding truck is using a RS kit and SD frt and rear springs. lots of posts on this or contact me, I came up with this 7-8 years ago and hundreds have done this mod I would suspect by now. I can get you everything you need and provide phone support.
Min lift is aprox 4" with V codes I have had one customer use Excursion springs to just have a 3" lift+- and a softer ride quality..so far he loves that combo. You could also use these codes that would varrie the front lift height: S — 2C34-5310-AAB, 4,000 lb. T — 2C34-5310-ABB, 4,400 lb. U — 2C34-5310-ACB, 4,800 lb. V — 2C34-5310-ADB, 5,200 lb. W — 2C34-5310-AEA, 5,600 lb. X — 2C34-5310-AFA, 6,000 lb. Cary
__________________
We only carry the BEST parts and never compromise just to get a sale. Dealer for: Full Force, Tymar, BTS, Icon, Pure Performance, TW tunes, just to name a few. email: ctperformanceinc@yahoo.com Website: Home Introduction only. Please PM if I can help. |
|
#10
|
||||
|
||||
|
Re: Rough Country Sus lift opinions
Cool nice info Carey ! Soon for me my beast is saggen to beat hell in the front.
__________________
97 crew cab shorty-4x4 Overfueled for your pleasure ! Didn't ancient cultures make slaves or people they felt were INFERIOR carry them everywhere???? That's the way I see it . |
![]() |
| Thread Tools | |
| Display Modes | |
|
|