|
|
|
|
|||||||
| Register | Members List | Timeslips | Calendar | Sponsors | Becoming a Sponsor | Mark Forums Read | Auto Escrow | Auto Loans | Insurance |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-18-2009, 04:10 AM
|
|||
|
|||
|
Fuel filter wrench?
What is the tool that you all recomend for changing the frame rail fuel filter on a 6.4L.
Also, are the filters from Napa good, or just OK? Thanks JT
__________________
Never fight with a fool. Others may not be able to tell the two of you apart! 
|
| Sponsored Links | |
Advertisement |
|
|
#2
03-18-2009, 11:24 PM
|
||||
|
||||
|
Re: Fuel filter wrench?
I use a socket from MATCO that is made for those oil/fuel filter lids (36mm), with a 3/8 drive flex head ratchet and never have any trouble.
I have no personal experience with NAPA filters, but if it were up to me i would only use ford fuel filters, some of the other brands don;t fit in the canister properly and can get in a bind and cause the lid not so seat right, the same goes for the oil filter, I cannot tell you how many "other" brand oil filters i have taken off of 6.0's and 6.4's that were crushed and broken because they were the wrong size
__________________
Early 1999 (4/98) 7.3, Automatic, f-250 superduty, 4x4, crewcab, shortbed. CCV Mod knn intake banks exhaust banks power elbo banks turbo housing big head waste gate-disconnected Tuning by Gearhead Automotive Performance 4 gauge pod with DiPricol pyro, boost, trans temp, HPOP http://www.dieselpowerproducts.com/
|
|
#3
03-19-2009, 05:10 AM
|
|||
|
|||
|
Re: Fuel filter wrench?
Thanks!
|
|
(View-All)
Members who have read this thread : 66
|
|
| 140hpHarleys, 1999SuperDutyStroke, 444-4D, 530farmboy, 70torinocobra, 86_Notch, 99powerstroke, abbottfarms, abianca99, almostfinished, AMB, Arisley, bigjake0524, blkbrd36, Bugman, Bushwakd, crowz, daryl4412, DIRTBIKEZ, dunesday, dzlstroker, F-350, fordtrucksrule7, Ignorant1, isimar, Ithaca, JB017.3, jdc753, joebob3093, joefalco, Joey7319, justin202, Justin6.0, jweeezy350, kainers, KDM, kip4234, kystanger, L10, maddzack, Martin #6, mbg75, Mike Hickman, nasty96, NorCal997.3, PSDnate, pstroke96, Rob02F350, Rogue1970, rpm-inc, sneaky09, squeak12, StrokerTurbo7.3, strokinsince'95, suprhlr, Tampa450, tch.280, TheDirt, tkdbf350, treyloco, WesternWA6.4, Wheels, zilla68 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
