d60, sterling, turbo setup for 6.9, zf5

[brianell]

all coming from 4wd f350
D60 front, 4.10 with steering linkage
front springs, front driveshaft
zf5 trans with tcase
10.25 sterling 4.10
sidewinder banks turbo kit

was cab&chassis, rear end measures 66.5" width. Front has dually hubs, but you can use big ttb hubs, and drill out the rotors. Im planning to keep the dually hubs themselves.

looking for 1200 on the set of axles with front springs, steering, front driveshaft, and drivers ubolt plate
500 on the trans and tcase


local pickup only, northern CO, NW of ft collins
offers considered.

[brianell]

Trans is sold.
Dana 60 and everything else available, tho guy didnt take the pedal assembly with the trans, so have that too
banks kit is of a 6.9, might fit the 7.3 too?

Originally Posted by brianell

all coming from 4wd f350
D60 front, 4.10 with steering linkage
front springs, front driveshaft
zf5 trans with tcase
10.25 sterling 4.10
sidewinder banks turbo kit

was cab&chassis, rear end measures 66.5" width. Front has dually hubs, but you can use big ttb hubs, and drill out the rotors. Im planning to keep the dually hubs themselves.

looking for 1200 on the set of axles with front springs, steering, front driveshaft, and drivers ubolt plate
500 on the trans and tcase


local pickup only, northern CO, NW of ft collins
offers considered.

[brianell]

Have the axles, and picked up a set of single wheel hubs as well. So you get complete axle, single wheel hubs, I keep the dually hubs.

[Bignbadbelair]

the turbo kit will also fit a 7.3 idi.

[brianell]

complete SRW d60 and sterling setup left, turbo, etc sold.

[brianell]

bump it up

[brianell]

front axle has springs, and ubolts.plates still attached, as well as steering
4.10 gears, can be SRW, or dual hubs, choose one, I have both sets.

rear complete, 4.10

everything else is gone.

[evans213]

How much for the complete front axle. I dont need the rear and where are you located?

[brianell]

Originally Posted by evans213

How much for the complete front axle. I dont need the rear and where are you located?

northern CO NW of ft collins
800 on front with springs and steering still on it DRW or SRW hubs on it, have both, your choice

[evans213]

Well to far for me lol