quarter mile times???

[CanadianPS]

So the other day I g tech'd my truck not surprised how slow it was lol just curious what kinda numbers et/mph/60ft times you guys are doing? And on what setup?

I know theres lots to consider like elevation, truck size, transmission blah blah just a general post

[Short Bus]

4-5 years ago my full weight crew cab short bed ran a 12.5@110 I dont remember what the 60' was but it wasnt great since i had an open diff, street tires and no traction bars. Basically unhooked from teh goose neck trailer and went to teh track. It dynoed consistently at 550hp on fuel only and calculated 650-660 on spray. The 99 i have now should be a sub 13 second ride pretty easily, maybe even touch the 12.5 range fuel only.

[CanadianPS]

Seriously one guy on here has put his truck on the track or gtech'd it?

Thanks short bus I'm just tryin to get an idea as well where I could get my truck into I'd like to be able to do mid to low 13s fuel only.

[PowerstrokeJunkie]

A set of 238/100s or 80s and a 38r or s366 with a fuel system and an oil pump will get you in the low 13s

[CanadianPS]

Well ive started to piece my setup together should be together by christmas,
Bell HFSB turbo kit
250/100
Srp1.1
Regulated return
Studs
Springs
Pushrods
Bdp tunes.

Nothing Krazy but should do the job puttin the beat down on all my buddy's dodges lol

[PowerstrokeJunkie]

Go with 80% nozzles instead, my. 02

[Nodge]

What turbo do you plan to run?
Stock?

[PowerstrokeJunkie]

Its right there.

[Nodge]

So it is... I'll be jiggered...

[Mudwizer]

psj why do you say to go with 80% nozzles egt cooler ?