![]() |
![]() |
|
|||||||
| Register | Members List | Timeslips | Calendar | Sponsors | Becoming a Sponsor | Mark Forums Read | Auto Escrow | Auto Loans | Insurance |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Dash Bezel Questions?
I need a dash bezel for both of my trucks. My question is can I cut the square out the on bezel? The reason I ask is because gasser dashes are easier to find.
__________________
Ts 6 position Cold Air Intake 3 inch down pipe 4 inch straight pipe more to come I hope |
| Sponsored Links | |
Advertisement |
|
|
#2
|
||||
|
||||
|
Re: Dash Bezel Questions?
yes you can
__________________
1996 F250: -5spd w/4.10's -3" dp to 4" straight pipe -SouthBend ConOFE clutch -K&N cone filter -EBPV brake -ISSPRO Gauges -Custom E-Fuel -Dana 60 |
|
#3
|
|||
|
|||
|
Re: Dash Bezel Questions?
Yes you can cut it out, it won't be 'perfect' but will work
__________________
'97 F-250 Supercab, 4x4, Dana 60 swap, Intake, IDM Mod, TW 6 pos chip, FS2500 Oil By-pass, Turbo back exhaust, RSK w/ SD springs, 1.0 compressor housing, EBPV delete, Pedestal Mod, E-Fuel with "Tight-wad" regulator mod, HPO-X line, Hydroboost w/ Redhead steering box |
|
#4
|
||||
|
||||
|
Re: Dash Bezel Questions?
I did the same thing. It wassnt a perfect cut but real close and I took black silicon and put on the back side so the light wouldn't shine through it and look like crap. It looks stock now and if you wasn't looking for it then you would never know.
__________________
97 F250 ccsb, built auto, tranny cooler, straight piped, 3" dp, Rosewood Stage 2 180cc, T500 HPOP, TW chip, S&B intake, glowshift gauges |
|
#5
|
||||
|
||||
|
Re: Dash Bezel Questions?
Ive got two good ones sitting on my shelf.
|
|
#6
|
||||
|
||||
|
Re: Dash Bezel Questions?
Are they for a diesel or a gas?
|
|
#7
|
||||
|
||||
|
Re: Dash Bezel Questions?
Diesel
|
|
#8
|
||||
|
||||
|
Re: Dash Bezel Questions?
How much shipped to 42642?
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|