p0470 Code on 95 F350 - PowerStrokeNation : Ford Powerstroke Diesel Forum


Home Today's Posts Mark Forums Read
Go Back   PowerStrokeNation : Ford Powerstroke Diesel Forum > F-250 & F-350 1986-1997 & Other Ford Trucks > 1994-1997 Power Stroke Technical Info
Register Members List Timeslips Calendar Auto Loans Sponsors Becoming a Sponsor Mark Forums Read Auto EscrowInsurance

PowerStrokeNation.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-24-2012, 01:54 AM
coyconner1983
Offline
PSN Newb
Member's Gallery
 
Join Date: Feb 2012
Location: San Angelo Texas
Posts: 29
p0470 Code on 95 F350

The truck has been running great until today... I went to work and went out to the truck and fired it up and it was running good, then all of a sudden it was having a real rough idle and the cel was on.. Sat there for about 4 or 5 mins and then all of a sudden the engine light went off and it started running great again.. Drove it about 15 miles shut it off, refired and idled good for about 5 secs then cel light and rough again.. 5 mins later cel is off and truck ran fine back to work.. (The check engine light goes off and right when it goes off the truck runs great. the second the cel comes on the truck runs like crap). Does this sound familar?

Error code p0470

Thanks
Reply With Quote Quick reply to this message Go to the top
Sponsored Links
Advertisement
 
Sponsored Links
Advertisement
 
  #2  
Old 02-24-2012, 02:34 AM
zilla68's Avatar
zilla68
Offline
PSN Veteran
Member's Gallery
 
Join Date: Jan 2009
Location: Moore, Oklahoma
Posts: 1,385
Re: p0470 Code on 95 F350

p0470 exhaust pressure sensor circuit malfunction, biased sensor, open signal return
__________________
Chris

Moore, Oklahoma



1996 Ford F350 4x4 Crew Cab PSD
6637 tymar
285-75-16 BFG All Terrains/Weld Wheels
3:55 gears
Automatic with billet convertor, tugger and alto discs
New Gearhead Tunes:
1 heavy tow
2 stealth mode
3 tow/econ
4 street perf
5 all out
6 high idle
1.0 housing
exhaust
Reply With Quote Quick reply to this message Go to the top
  #3  
Old 02-24-2012, 03:44 AM
Patrick Feeley's Avatar
Patrick Feeley
Offline
PSN Veteran
Member's Gallery
 
Join Date: Mar 2008
Location: Tehachapi, CA
Posts: 1,879
Re: p0470 Code on 95 F350

Probably won't be all that helpful, but here's the pinpoint tests for that code (may provide some insight). They differ for the KOEO (H1 and H2) and continuous (starts at H3) versions of the codes.

Quote:
H1 DIAGNOSTIC TROUBLE CODE (DTC) 0470

DTC 0470 indicates an EBP sensor malfunction was detected during KOEO On-Demand Self Test.

Possible causes:
-- Faulty EBP sensor
-- Open signal ground
-- Faulty PCM

NGS Tester installed. Key on/Engine off. Select EBP Pid from the PID/DATA monitor menu on NGS Tester. Is EBP reading below 18.5 psi?

Yes: CLEAR DTC and RERUN KOEO On-Demand Self Test. If code is still present, REPLACE PCM.

No: GO to H2.

H2 SIGNAL GROUND CIRCUIT CHECK

Key off. Disconnect EBP sensor connector. Inspect for loose, damaged or pushed out pins. Repair as necessary.

Measure resistance from Pin A [Circuit 359 (GY/R)] to chassis ground.
Is resistance less than 5 ohms?

Yes: REPLACE EBP sensor. CLEAR DTCs and RETEST.

No: REPAIR open in signal return Circuit 359 (GY/R). CLEAR DTC and RETEST.

H3 CONTINUOUS DIAGNOSTIC TROUBLE CODE (DTC) 0470

Continuous DTC 0470 indicates an exhaust back pressure malfunction was detected during normal driving conditions.

Possible causes:
-- Faulty EBP sensor
-- Faulty connection
-- Faulty PCM

NGS Tester installed. Select EBP Pid from the PID/DATA monitor menu on the NGS Tester. Observe the PID while performing the following:

-- Grasp the vehicle harness close to the EBP sensor connector, wiggle, shake the vehicle harness while working towards the PCM.
Does the EBP reading fluctuate?

Yes: ISOLATE intermittent connection problem. CLEAR DTCs and RETEST.

No: GO to H4.

H4 CONNECTOR INSPECTION

Disconnect EBP sensor connector. Inspect connector terminals and sensor terminals for signs of poor connection or corrosion. Inspect connections at the 42-way and PCM connectors.
Are all connections good?

Yes: Unable to verify problem at this time. CLEAR DTCs.

No: REPAIR connection concern as required.
Cheers!
__________________
97 F250 SC 4x4, E4OD, 4.10 LS, Basically Stock, Relocated Block Heater Plug, Ext Trans Filter, Tru-Cool Max, I/C Mounted but not Plumbed

SOLD: 94 F350 CC DRW PSD, 5 Speed, 4.10 LS, SBC Con-O, Baldwin Filter, Tymar HPX Hose, 3 DP, Bilsteins, $12 AIC, Coolant Filter, Explorer O/H Console, Trans Temp, Boost, and Pyro, Pedestal Mod, Gutted EBPV
Reply With Quote Quick reply to this message Go to the top
  #4  
Old 02-25-2012, 03:14 AM
coyconner1983
Offline
PSN Newb
Member's Gallery
 
Join Date: Feb 2012
Location: San Angelo Texas
Posts: 29
Re: p0470 Code on 95 F350

I have more symptoms since i had time to mess with it today... Real rough idle,engine has a different tone to it,no boost while reving up, egts running around 4 to 500 degress at idle,when i turn the truck off it sound like a airplane.. I looked for the sensor to unplug it and i cannot for the life of me find it. Can someone please post a pick of it on a OBS.

Thanks guys
Reply With Quote Quick reply to this message Go to the top
  #5  
Old 02-25-2012, 06:06 AM
bracketracer's Avatar
bracketracer
Offline
PSN Veteran
Member's Gallery
 
Join Date: Oct 2011
Posts: 628
Re: p0470 Code on 95 F350

Welcome to guzzle's Exhaust Backpressure Sensor Cleaning Maintenance Web Page

Scroll down the page a bit.
Stephen
__________________
Newest project: 1995 F350 CC/DRW 2WD E4OD. 3" DP, 4" Diamond Eye system. But I'm still fixin' the broken stuff......
Reply With Quote Quick reply to this message Go to the top
  #6  
Old 02-25-2012, 02:25 PM
hendricksbus's Avatar
hendricksbus
Offline
PSN Local
Member's Gallery
 
Join Date: Jan 2010
Location: rural wisconsin
Posts: 431
Re: p0470 Code on 95 F350

you will only make boost under load. it's normal not see any boost by just reving it up..
__________________
1996 F-250,Ext.cab,LB,4x4
stock tires

180K,6 pos chip,Open air filter, 3'' down pipe,fpr mod,ccv mod
4.10s gears!
Boost, Pryo and transmission gauges
sonnax shift improver kit
bronco tank mod
hayden cooler for transmission
Reply With Quote Quick reply to this message Go to the top
  #7  
Old 02-25-2012, 02:30 PM
coyconner1983
Offline
PSN Newb
Member's Gallery
 
Join Date: Feb 2012
Location: San Angelo Texas
Posts: 29
Re: p0470 Code on 95 F350

Quote:
Originally Posted by bracketracer View Post
since mine is a 95 is the sensor in the same spot?.. Thats where i looked yesterday and dont see it.. Do i need to pull the black plastic cover off to be able to see the sensor?
Reply With Quote Quick reply to this message Go to the top
  #8  
Old 02-25-2012, 05:07 PM
screamnstroker's Avatar
screamnstroker
Online
PSN Local
Member's Gallery
 
Join Date: Dec 2011
Location: B.C. Canada
Posts: 129
Re: p0470 Code on 95 F350

Yes, Pull the cover off (if your talking the black shroud). it will be in the same spot as on the website
__________________
1996 F250 ECLB- 2.5'' add a leaf-pack level TTB, Intake system, 3 inch downpipe-4inch diamond eye, ts 6 pos with php tunes, Gauges- Pyro,trans,boost...scan gauge on the column Otherwise stock
Reply With Quote Quick reply to this message Go to the top
  #9  
Old 02-26-2012, 12:30 AM
coyconner1983
Offline
PSN Newb
Member's Gallery
 
Join Date: Feb 2012
Location: San Angelo Texas
Posts: 29
Re: p0470 Code on 95 F350

PowerStrokeNation : Ford Powerstroke Diesel Forum

Well i think i found the sensor.. i unplugged it and started the truck and didnt help it at all.. Do i need to erase the codes then try it again? The truck is at work and i want to get it home so thats why i am trying the easy stuff first. Since its still doing it then im guessing the sensor is good and maybe the pipe is clogged?
Attached Images
File Type: jpg ebps.jpg (83.3 KB, 26 views)
Reply With Quote Quick reply to this message Go to the top
  #10  
Old 02-26-2012, 02:51 PM
coyconner1983
Offline
PSN Newb
Member's Gallery
 
Join Date: Feb 2012
Location: San Angelo Texas
Posts: 29
Re: p0470 Code on 95 F350

i came back up this morning to work and disconnected the sensor and cleared the codes and now it will start for about 2 seconds and shut back off. no throttle response what so ever. I was able to pull a second code and it was p0472. I data streamed the ebps and it stayed around 22.1. that was with the truck off and with it running for the few seconds it did. what does the 22.1 mean? is it good or bad?
Reply With Quote Quick reply to this message Go to the top
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




(View-All Members who have read this thread : 92
'94IDITurbo7.3, 02-jeeper, 19stroker97, 1SLO GT, 7.3L F-250, 7.3psd1999, 95F250, 96Crewcab7.3, 97CCLB410LS, 97obspsd, bentpushrod, Bergy1, billmoody1, black7.3, blageurt, bpa658, bracketracer, Bradbilt, Brockbit, buckingbrutus, Bugman, Cass, ccf350stroker, ccsc, cmt9399, co04cobra, cobrabc1993, countryboyz04, coyconner1983, cthom388, dalejrfan88, Dan V, danielzink, Dieselpop, DNSPSD, eric96obs, f250towrig, F350 FF, farmer09, floridastroke, foxman, freddie, friskyjake, glovemeister, Griffin, hendricksbus, idahojunker, JD3020, jess, JHartley, Jim g, jjdup, JMWRIGHT335, josh_mangan, jsterli1, jven6.0, KADEH, Kevinwatts, Kgaeta92, lincolnlocker, Litnng, loudmouth, mandkole, maxlf311, mcreed90, Mini-Stroke..., morefuel, muddynoll, MustangMatt96GT, oneton, OUTLAW101, Patrick Feeley, pff250hd, portlandareae28, POwerstroke Named BIG D, POWERSTROKE2311, prostock1, Rkidd121209, Robjesup88, Roenicke95stroker, Sciulli, screamnstroker, smokinford07, The Oiler, tjul1128, u.f.o., VaEx, wadeclinton, wannabstrokin, wildbillcody97, young95stroker, zilla68
Thread Tools
Display Modes


Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:20 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.