cure for p0107 - PowerStrokeNation : Ford Powerstroke Diesel Forum


Home Today's Posts Mark Forums Read
Go Back   PowerStrokeNation : Ford Powerstroke Diesel Forum > Super Duty 1999-Current > 7.3L Power Stroke Technical Info
Register Members List Timeslips Calendar Auto Loans Sponsors Becoming a Sponsor Mark Forums Read Auto Escrow

PowerStrokeNation.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2008, 09:32 PM
bork
Offline
PSN Local
Member's Gallery
 
Join Date: Apr 2008
Posts: 135
cure for p0107

SES keeps coming on even before I start engine.KOEO. P0107 = manifold absolute pressure/barrometer pressure circuit low input. How do I correct this? Is there a sensor to change out?
__________________
1999E350 7.3psd, XLT, 15 pass/ext, purchased 6/05 w/255k mi, BTM/straight pipe,5/06 BTS,1"shimmed front coil springs,MichXPS 235/85 16 R,FredGroeske2"RearWheelSpacers,1.5" rear swaybar,AIC,3 pillar guages, Tekonsha Envoy,coolant filter,4pos DPtuner,In-tank mod & pooned,dahl-100 prepumpfilter,Scanguage,Bilstein shocks, rear R&R 280K +new tracloc
Reply With Quote Go to the top
Sponsored Links
Advertisement
 
Sponsored Links
Advertisement
 
  #2  
Old 07-09-2008, 12:49 AM
kainers's Avatar
kainers
Offline
Starting Over
Member's Gallery
 
Join Date: Jul 2007
Location: Klamath Falls, Oregon
Posts: 4,629
Re: cure for p0107

the Baro is part of the PCM as far as I know.The map is a sensor in the engine compartment on the passanger side .You can fallow a 1/4 hose off the Y pipe to it.You can try unplugging it or checking for wire chafe.On a van I have no idea if they are in the same locations.
Reply With Quote Go to the top
  #3  
Old 07-09-2008, 01:12 AM
DIRTBIKEZ
Offline
PSN Local
Member's Gallery
 
Join Date: Sep 2007
Location: Long Island, NY
Posts: 403
Re: cure for p0107

In the early superdutys the baro was separate from the PCM, if its anything like the truck I believe it was located up above the go pedal.

**If your van was built before 12/7/98 the baro is actually seperate.
__________________
1999 F350 6SPD 4x4 LARIAT Tymar, DP-F5, ITP Reg Return, 4" Exhaust **SOLD**
2002 F350 REG CAB DRW 2WD Tymar, PHP, 5" stack, DJM drop hangers and shackles, Hellwig sway bars, Nathan K5LA, Full Power '08 Mirrors...**SOLD**
Reply With Quote Go to the top
  #4  
Old 07-09-2008, 11:08 AM
bork
Offline
PSN Local
Member's Gallery
 
Join Date: Apr 2008
Posts: 135
Re: cure for p0107

Hmmmm? Should I call my local parts guy and ask for a barrometer sender? There is a 3 pinned connector with a a small box on it, similar to a turn siganal flasher, under right side of steering column, under dash.
Reply With Quote Go to the top
  #5  
Old 07-09-2008, 11:25 PM
DIRTBIKEZ
Offline
PSN Local
Member's Gallery
 
Join Date: Sep 2007
Location: Long Island, NY
Posts: 403
Re: cure for p0107

Yeah, 3 wires. Might be dark blue/light green, brown/white and gray/red.
Reply With Quote Go to the top
  #6  
Old 07-10-2008, 11:18 AM
bork
Offline
PSN Local
Member's Gallery
 
Join Date: Apr 2008
Posts: 135
Re: cure for p0107

Yup, the thingy under dash, had part #'s & ford send it was a barro sensor. Originally I asked for the sensor & they couldn't find it listed. Thank heaven for the #s. over a $100 for the little thing. got it though, plugged it in & cleared codes & so far no SES . Advance auto could get part in 2 days for around $70.00. (borg/warner) would you guys trust these over oem? I hated to wait any longer, cause everyonce in a while I get a noisey rattle for a few seconds. injectors? then SES would come on. I hope this barro fixes this also.
Reply With Quote Go to the top
  #7  
Old 07-10-2008, 11:50 PM
DIRTBIKEZ
Offline
PSN Local
Member's Gallery
 
Join Date: Sep 2007
Location: Long Island, NY
Posts: 403
Re: cure for p0107

Cool, hope that was it.
Reply With Quote Go to the top
  #8  
Old 07-11-2008, 03:15 AM
bork
Offline
PSN Local
Member's Gallery
 
Join Date: Apr 2008
Posts: 135
Re: cure for p0107

Update, drove it about 250 miles & ran good. No woodpecker sounding injectors. & no SES. And almost seems to have better milage, 1-2, according to scanguage #s. But more time will tell. Or maybe I got a good batch of fuel. (added 3/4 fillup) Also, 1st time I used the AE, & appears I have saved on repairs or kept stealership from botching it up for $1k more.
Reply With Quote Go to the top
  #9  
Old 07-14-2008, 08:58 PM
solareclpse2000's Avatar
solareclpse2000
Offline
Solareclpse
Member's Gallery
 
Join Date: May 2008
Location: kingsland,ga
Posts: 345
Send a message via Yahoo to solareclpse2000
Re: cure for p0107

ok so what if your trucks pops a 0107 and 0108 at the same time?
__________________
2002 F250 crew cab, short bed, 7.3, 4x4, auto,8.5 procomp lift/37 in. tires.
needs new badges and paint,
it's a 7.3 PSD.what more can i say? does anyone have any extra parts they need to get rid of?


Reply With Quote Go to the top
  #10  
Old 07-15-2008, 12:22 PM
bork
Offline
PSN Local
Member's Gallery
 
Join Date: Apr 2008
Posts: 135
Re: cure for p0107

I dont know? I'm glad mine was seperate from the PCM, & was able to plug & play. I just wished there was a friend with same vehicle to swap parts & try befor purchasing a new part, especially the ($100 +) non returnable electrical ones. I did find at Advance auto parts, a borg/warner barro sensor for around $65,but I'd have to wait 2 days. IIRC (but I was going on a trip next am & couldn't wait.) Is yours in PCM? Do you have access to another PCM? to try?
Reply With Quote Go to the top
Reply


(View-All Members who have read this thread : 74
20X, 250turbo, 777mechanic, 90ranajo, adamsryan, Arisley, Barnbuilder, bigdjvp, Bignbadbelair, BMac, bork, Brian Cox, Calico5, chevyhurstolds84, chunkdunker, Clouse2411, CooterBrown, Dantheman, dblamp, DIRTBIKEZ, ditch_dawg, Doakster, e444, Eford00, Fddriver2, fordboy424, GCncsuHD, Haul_n_horses2, JLDickmon, jlegg, josesimoes2, Juniorssrollin, Justin@DP-Tuner, kainers, kampinguru, KRUISECONTROL, Logan21SV, madmaxz, Madvan, Matikus, MATREDGT, matthewd11, mattr66, mattrac, mazdaparts, medicman88, Millerfarms, Mr. Bob, MudSouth, mustang_gt_350, Nodge, NWSUPRD, Ramblin'_Man, redmist, rideracelivemx7, Ripsaw, riverjet, Rogue1970, Roots, Rustler, SeeYa, sixiron, solareclpse2000, steck, tank23, thedudebrah, theSLEEPER, tkdbf350, treyloco, txoutlaw, Willy
Thread Tools
Display Modes


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:57 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.