160cc injector

[Robert6401]

Ahh, ok. Just making sure I wasn't missing a deal somewhere.

[powersmoker73]

Once again, more awesome advice so I don't have to make the same purchase twice. Thanks guys!

[907stroker]

Originally Posted by Tim @ P.I.S.

From what I see stage 1's come in two options with a stock nozzle or a 30% nozzle. If you go 80-100% nozzle that is usually a stage 2 setup.

What ever you go with make sure they are new nozzles. For the little bit extra they cost it is a wise investment.

where can i get a stage 1 with a 30% nozzle.
all i find is stock nozzle.
also i want to use reman

[OBSWIZ]

We have them...Full Force's but I would not use a 30% nozzle.

[powersmoker73]

Sounds 100% nozzle is the way to go and tune it for u have or dont have

[Tim @ P.I.S.]

Originally Posted by OBSWIZ

.......but I would not use a 30% nozzle.

why is this?

I have nothing but great success with this nozzle. The only thing I will ever put a (new)stock nozzle on is a stock injector.

[Tim @ P.I.S.]

Originally Posted by powersmoker73

Sounds 100% nozzle is the way to go and tune it for u have or dont have

There is not a huge diff in the final output in the 80 vs 100% nozzles.

I always recommend the 80's for manual trucks and with stock turbos.

[907stroker]

Yes so why not 30%????

[powersmoker73]

Did I read that correctly as 80% for manual trucks and stock turbo trucks?

[907stroker]

How big of an injector for that nozzle?