coope3 08-16-2007, 12:58 AM Just curious if the new turbo has been on the dyno yet. Someone please post some info in this turbo. For those of us waiting to get one it is frustrating.
CSIPSD 08-16-2007, 03:23 PM I want to get my hands on one for some Drive pressure and housing testing!!!
gregrob 08-16-2007, 05:02 PM I want to get my hands on one for some Drive pressure and housing testing!!!
Dont we all :D
thetonka 08-16-2007, 05:28 PM Dont we all :D
Either I have a dirty mind or you are a pervert. :D
Anyway, BB needs to get off his butt and get some dyno results. The 38R TN fights just aren't interesting enough. :swordfight:
CSIPSD 08-16-2007, 05:35 PM ;)Anyway, BB needs to get off his butt and get some dyno results. The 38R TN fights just aren't interesting enough. :swordfight:
Interesting or entertaining??? I can make them more entertaining...;)
thetonka 08-16-2007, 05:37 PM You're doing a great job of that. Keep up the good work.
CSIPSD 08-16-2007, 05:38 PM You're doing a great job of that. Keep up the good work.
:postwhore: :postwhore: :postwhore: :postwhore: :postwhore: :postwhore: :postwhore: :postwhore: :postwhore: :postwhore:
thetonka 08-16-2007, 05:39 PM Bite Me. :gun:
bbunting 08-16-2007, 05:49 PM We will have some additional units shipping to select TN customers for testing, dyno, etc. Hope to have an answer today on that. Any volunteers?
There is also talk of casting the new F1 wheel out of the GT-K along with opening up the inducer for a high output version. But we'll see where that goes.
Based on the spool up so far, there will probably only be a 1.00 housing, and a 1.15 that will need to be machined to fit the larger wheel in the TN.
CSIPSD 08-16-2007, 05:59 PM We will have some additional units shipping to select TN customers for testing, dyno, etc. Hope to have an answer today on that. Any volunteers?
There is also talk of casting the new F1 wheel out of the GT-K along with opening up the inducer for a high output version. But we'll see where that goes.
Based on the spool up so far, there will probably only be a 1.00 housing, and a 1.15 that will need to be machined to fit the larger wheel in the TN.
There is a Dyno event this weekend up in Portland... But I am only about 15 minutes from DDP in Monroe right now anyway... I will try and get another 1.15 housing and send it too you.
thetonka 08-16-2007, 06:01 PM I would love to volunteer, but I don't think I would be a good candidate. Just be sure and let me know if there is an exchange plan or if/when TN comes out with an upgrade for the BB center section. I am interested depending on price.
Keep us updated, and keep up the good work BB.
DarkShadowDiesel 08-16-2007, 06:23 PM We will have some additional units shipping to select TN customers for testing, dyno, etc. Hope to have an answer today on that. Any volunteers?
There is also talk of casting the new F1 wheel out of the GT-K along with opening up the inducer for a high output version. But we'll see where that goes.
Based on the spool up so far, there will probably only be a 1.00 housing, and a 1.15 that will need to be machined to fit the larger wheel in the TN.
let me know what you need, i'd be interested.
Tom S 08-16-2007, 06:26 PM We will have some additional units shipping to select TN customers for testing, dyno, etc. Hope to have an answer today on that. Any volunteers?
:redspotdance: Me :redspotdance: Me :redspotdance: Me :redspotdance:
boggerr 08-16-2007, 08:14 PM We will have some additional units shipping to select TN customers for testing, dyno, etc. Hope to have an answer today on that. Any volunteers?
There is also talk of casting the new F1 wheel out of the GT-K along with opening up the inducer for a high output version. But we'll see where that goes.
Based on the spool up so far, there will probably only be a 1.00 housing, and a 1.15 that will need to be machined to fit the larger wheel in the TN.
I volunteer......Just send me the turbo now:D
coope3 08-16-2007, 10:36 PM Brian
I have a truck pull in about 3 weeks. Love to test that turbo there.
Dzacc 08-16-2007, 11:27 PM I am running the Garrett BB and COULD do a before and after dyno if you make me an offer I can't refuse. I already know how this one surges and altitude is the absolute best place to test for surge.
DZ
389SixPack 08-17-2007, 01:11 AM We will have some additional units shipping to select TN customers for testing, dyno, etc. Hope to have an answer today on that. Any volunteers?
I'll volunteer!!
ditch_dawg 08-17-2007, 12:28 PM I would be happy to help out.....be real interested to see what it would do with stock sticks along with some live tuning.
bbunting 08-17-2007, 04:20 PM I am running the Garrett BB and COULD do a before and after dyno if you make me an offer I can't refuse. I already know how this one surges and altitude is the absolute best place to test for surge.
DZ
Dave
I'll see what I can do-I do like the altitude and injector combo.......
RockinJW 08-17-2007, 04:38 PM You know where to find me. mini me's, terminator, and 4500ft. I'll put it to the test.
Dzacc 08-18-2007, 01:51 AM Dave
I'll see what I can do-I do like the altitude and injector combo.......
:redspotdance:
Dzacc 08-18-2007, 01:53 AM You know where to find me. mini me's, terminator, and 4500ft. I'll put it to the test.
I'll see your 4500' and raise you another 6000. :gun:
|