What do you OBS boys want for Christmas?

Send us some ideas for your Christmas Wish List:ford: Maybe we can help Santa Find some deals for you:ford:

gauges, new bed, 19.5's or at least some new 285's, moose pump, bb code inj, new euro headlights,

What is a Moose Pump?

shocks, steering stabilizer, smoked head lights =)

What is a Moose Pump?

It's alittle bigger then an Elk or Deer pump.

Paul, if there is something us OBS guys need it's fuel tank options. Mainly if we want to switch to electric fuel & run the fuel system to 1 tank instead of 2. I'd be content with a 28-38gal tank as a single, figure with a 30gal tank I can go 400-600 miles without refilling depending on driving conditions. The biggest issue I have with a 38gal rear is it's steel & any i find in a junk yard up here will be rusted out & have had gas sitting in em for a long period of time.
So here's what I'm pondering, installing a SD tank on an OBS. Is there room for it without hitting the driveshaft? If it would clear with slight mods I'd be game for it, the tanks are plastic so rust isn't an issue for the northern folks. SD tanks are easy to come by & aren't bad in price. The other nice thing too is they came in diffrent sizes depends on cab/bed config.
If it won't fit then disregard my idea. Then we will have to explore other options like others have done, but I'd still rather pay a vendor the money for a product then cruise around online for parts.

Cat...why not buy a 38 gallon one F26 D or E and coat it with undercoating? The one I installed was Zinc coated from the factory and hopefully the undercoating spray on stuff will help some. I really like the extended range with this tank, stock front tank and the 45 gallon drybox fuel cell combo I run. Where I drive fuel cost can vary in price significantly, so this allows me to shop around some.....

For Xmas......rebuilt 150/146 (to something bigger) outta the black truck and into the Red truck without me having to get dirty......hahahaa

jrc

What is a Moose Pump?

Not something you could supply. It an IDI inj pump from a guy on oilburners.net. I was moreso just saying to be funny.



As to what CAT rebel said....I rear sending unit option that isnt $300 would be great!!

A new bush. The old one is starting to bicth...

Paul, if there is something us OBS guys need it's fuel tank options. Mainly if we want to switch to electric fuel & run the fuel system to 1 tank instead of 2. I'd be content with a 28-38gal tank as a single, figure with a 30gal tank I can go 400-600 miles without refilling depending on driving conditions. The biggest issue I have with a 38gal rear is it's steel & any i find in a junk yard up here will be rusted out & have had gas sitting in em for a long period of time.
So here's what I'm pondering, installing a SD tank on an OBS. Is there room for it without hitting the driveshaft? If it would clear with slight mods I'd be game for it, the tanks are plastic so rust isn't an issue for the northern folks. SD tanks are easy to come by & aren't bad in price. The other nice thing too is they came in diffrent sizes depends on cab/bed config.
If it won't fit then disregard my idea. Then we will have to explore other options like others have done, but I'd still rather pay a vendor the money for a product then cruise around online for parts.

I agree. I feel that the selector valve is a large restriction when running large injectors. I also want something smaller to keep weight off the back of the truck so more weight can be put up front.

Stage 1 injectors, HPOP, chip, intercooler, gearvendors clutch/drive section, leather wrapped steering wheel, SD seats, weather stripping.

Betty wants some arp studs pushrods and some Comp910s preferably hwad studs i can get the rest and oh yeS bettys been nice

Betty wants some arp studs pushrods and some Comp910s preferably hwad studs i can get the rest and oh yeS bettys been nice

So you havent shaved your head again?

complete common rail set up :)

So you havent shaved your head again?

Man you're just not giving up on that :hehe: http://forum.thescubasite.com/fighting/fighting0029.gif (http://www.thescubasite.com)

Man you're just not giving up on that :hehe: http://forum.thescubasite.com/fighting/fighting0029.gif (http://www.thescubasite.com)

No one will let him live that down LOL

No one will let him live that down LOL

Maybe paul will come out with billet razors small enough for the glove box :D
(Sorry betty I had to http://serve.mysmiley.net/winking/winking0004.gif (http://www.mysmiley.net/free-laughing-smileys.php))

cup holders that dont suck!
and they gotta keep the jump seat
if you figured something like that out i would be in for one

My Christmas list includes more than i can afford but heregoes...
6" exhaust tips, scan gauge, fog lights, termy modded 17* pump, intercooler, e fuel, 35's, overhead gauge cluster with some gauges.

I want a rear view mirror with compass and temp!

I need billet rods, girdle, water injection. You know the cheap stuff :D

Single stack kit with 7 inch stack, quad pod (I've already got my mom buying me this), and 33" BFG ATs

FTE single stack kit

Could somebody replicate the Bronco overhead console plastic shell and steel bracket? All the other parts a guy can pillage from an explorer console at a u-pull wrecker.

Paul, if there is something us OBS guys need it's fuel tank options. Mainly if we want to switch to electric fuel & run the fuel system to 1 tank instead of 2. I'd be content with a 28-38gal tank as a single, figure with a 30gal tank I can go 400-600 miles without refilling depending on driving conditions. The biggest issue I have with a 38gal rear is it's steel & any i find in a junk yard up here will be rusted out & have had gas sitting in em for a long period of time.
So here's what I'm pondering, installing a SD tank on an OBS. Is there room for it without hitting the driveshaft? If it would clear with slight mods I'd be game for it, the tanks are plastic so rust isn't an issue for the northern folks. SD tanks are easy to come by & aren't bad in price. The other nice thing too is they came in diffrent sizes depends on cab/bed config.
If it won't fit then disregard my idea. Then we will have to explore other options like others have done, but I'd still rather pay a vendor the money for a product then cruise around online for parts.

i will be doin this to my truck with a fuel tank out of a full size bronco, if im not mistaken nate bailor "unlimited diesel" did this to his blue truck, should be a direct fit since the frame rails in the rear are the same, and the full size bronco tank is 33gal. on the 90-96 body year. hope this helps

i will be doin this to my truck with a fuel tank out of a full size bronco, if im not mistaken nate bailor "unlimited diesel" did this to his blue truck, should be a direct fit since the frame rails in the rear are the same, and the full size bronco tank is 33gal. on the 90-96 body year. hope this helps

We all know of the bronco tanks.

Replacement front cab:mad: mounts.. mine just rusted into dust and the cabs sitting on the frame rails

i will be doin this to my truck with a fuel tank out of a full size bronco, if im not mistaken nate bailor "unlimited diesel" did this to his blue truck, should be a direct fit since the frame rails in the rear are the same, and the full size bronco tank is 33gal. on the 90-96 body year. hope this helps

Yes I know all about the bronco tank, I planned on running one myself. I was exploring other options for fuel tanks.

how about a bigger tank selector valve? with moded pickups.as a kit. :)

I want a Stealth stage 1 and an intercooler:drool: An electric fuel pump would be nice too.

Single stack kit

100% nozzles for stage twos, Push rods, Valve springs. Cab bushings as well... Any old tools you would like to donate when you get new ones. :)

stage 2 injectors dp tuner

stage 2 injectors dp tuner

Paul doesnt carry dp tuner. He does however offer Swamps and Tony wildman tunes.

Electric fuel conversion that doesn't cost a grand, and not spend all my free time searchin the web. I know I'm lazy and cheap.

BIG or Dual HPOP, 05+ suspension swap, crower rods (in my dreams!!!), and a better option for fuel tanks like what CAT was saying!!! I'm tired of losing fuel pressure at wot with stock tanks and the selector valve...

Sponsership ;)

SD intercooler mount kit, turbo, and a tranny that doesn't mind 15psi boost launches cause the stocker sure doesn't.

Electric fuel conversion that doesn't cost a grand, and not spend all my free time searchin the web. I know I'm lazy and cheap.

:whs:

5'2" Blonde, nice rack, 110-120lbs, doesn't mind me working on trucks or in the barn!

5'2" Blonde, nice rack, 110-120lbs, doesn't mind me working on trucks or in the barn!

LOL LOL LOL LOL

Electric fuel conversion that doesn't cost a grand, and not spend all my free time searchin the web. I know I'm lazy and cheap.

Third that!

Third that!

I would be interested in a high flow fuel selector valve.
Even better if it were part of a complete kit!

I would be interested in a high flow fuel selector valve.Even better if it were part of a complete kit!

Ditto.

Somewhere to get aftermarket headlights marker lights and turn signals for a 97

Somewhere to get aftermarket headlights marker lights and turn signals for a 97

Ebay.

for some reason i am wanting a tonneuo cover for my puller.

hpop and an intercooler!

5'2" Blonde, nice rack, 110-120lbs, doesn't mind me working on trucks or in the barn!

http://static2.bigstockphoto.com/thumbs/3/2/8/large2/8236975.jpg

I want a new dash with a built in big screen GPS...:poke:

http://static2.bigstockphoto.com/thumbs/3/2/8/large2/8236975.jpg



That's HOT!!!!!!!:postwhore2::postwhore2:

stage 1 injectors, tuner, 4-5" exhaust, 3 pillar pod w egt trans and boost gauges, xlt reg cab split front seat, tilt column...etc

Cab bushings and some option to replace the radiator core support!!!!!Damn Salt

LED TAIL LIGHTS :)

and one (set/pair) of everything

arp studs
comp 910s
push rods, from whom ever!

Dual rear axles...........

stage 1's, d66, intercooler, triple disk TC, new wheels and tires.

stage 1's, d66, intercooler, triple disk TC, new wheels and tires.

Whats the difference between a D60 and a D66?

D60 = Dana 60 axle
D66 = Dominator 66 Turbo

D60 = Dana 60 axle
D66 = Dominator 66 Turbo

Ahh I see :doh: I thought they were both axles.

Its okay, we all have our moments lol

D60 = Dana 60 axle
D66 = Dominator 66 Turbo

Ahh I see :doh: I thought they were both axles.

I already have a d60 under my truck..........:evil

id like a visor hoodscoop new bed new seats turbo injectors etc etc

id like a visor hoodscoop new bed new seats turbo injectors etc etc

Why do you want a hood scoop?:doh:

Why do you want a hood scoop?:doh:

they add horsepower in bunches...


Id like a set of hybrid or B code injectors at least 250cc with a 100% or larger nozzle.

200% would be nice though.

H11 Head studs, Push Rods, Filled Block, Money Tree!!

Money Tree!!

I've got two but they are to big to dig up.

Yeah I bet!! lol text or call me tomorrow or monday HOMO!!

Yeah I bet!! lol text or call me tomorrow or monday HOMO!!

Check your phone fool haha

Check your phone fool haha

Would you two just get a room already.

stage 1's, d66, intercooler, triple disk TC, new wheels and tires.
If only you were closer I could help you with the rims and tires. I kept my chrome moto metal 951s and goodyear tires off my 97. They looked good on my obs.

Well mainly i'd love to have my old OBS back. I love my new OBS but I want to keep it fairly OEM. My old one was basically one big experiment. I never cared about modding the hell out of it or trial n' error mods...

As for the new one:
*turbo back exhaust into duals
*somebody to fix the stupid stack hole in my bed :mad:
*new 265s
*head unit

Other than that, i'm content :rockon:

I want a lift, I need a mildly tall truck again:D

d66 turbo, 3/5 lowering kit, rims/tires

My fuel leak to fix itself. :doh:

My fuel leak to fix itself. :doh:

I like that idea too!!! lol maybe some of the electric fuel componets to go on sale? I got the SD pump already... just gonna need the filtration setups.

Make your own filter setup. Very cheap!

I can't go electric yet, just because I only want to do my fuel system once.

PMs sent to everyone:D

Make your own filter setup. Very cheap!

thats the plan, but he could prolly get the parts for me.

I didnt get a PM! lol

I didnt get a PM! lol

you got one now;)

Hpop and Intercooler would be nice to see under the Christmas tree on Christmas morning:D

I've got an HPOP here ready to go:D

I've got an HPOP here ready to go:D

Ship it to Santa an tell him I've been a good little boy:D Is it an Adrenaline? And how much might this little present be?

Ship it to Santa an tell him I've been a good little boy:D Is it an Adrenaline? And how much might this little present be?

I do have the adrenaline:evil

I do have the adrenaline:evil

Ooohhhh:drool: How much??

hmm wish list. well some stage 2s intercooler piping/boot/clamps and spyder set up for an OBS, adrenaline hpop, 4'' exhaust, a D66, electric fuel conversion
and a rebuilt ZF5 since mine is on the way out. come on Santa think your slay can hold it all.

also Merry Christmas to all you PSNers

I do have the adrenaline:evil

Yeah I too am interested... I will be needing one soon!

Electric fuel conversion that doesn't cost a grand, and not spend all my free time searchin the web. I know I'm lazy and cheap.
:whs: and a nice intake, some pillar gauges, 4" straight through exhaust, ooh and some swamps tunes and maybe stage 1's and a d66 :drool:

stage 2 injectors, DIYs. Im gonna be calling you soon Jim!

stage 2 injectors, DIYs. Im gonna be calling you soon Jim!

Oh, be a man!
Stage 3's are where its at! :evil

Autometer Cobalt Gauges: Pyro, 0-60 psi Boost, Transmission Temp, Hypermax
Intercooler with all the trimmings, and an AFE Stage 2 Intake please :)

Bein a newb, my list looks really wimpy compared to others. Intake,exhaust, 3 gauge pod w pyro, tranny, and boost for starters.

Bein a newb, my list looks really wimpy compared to others. Intake,exhaust, 3 gauge pod w pyro, tranny, and boost for starters.

How about a 4 guage pod......:evil

pyro, boost, trans and a scan gauge:D Perfect combo.

Paul, you know what I want......

New sticks (soon to be paid for an ordered), Oil leak in Valley fixed.....Straight Pipe 4" Exhuast,3 gauge pod with Autometer Guages....... and..........last............but............not least........................ For my truck to quit being a basket case :doh:

New sticks (soon to be paid for an ordered), Oil leak in Valley fixed.....Straight Pipe 4" Exhuast,3 gauge pod with Autometer Guages....... and..........last............but............not least........................ For my truck to quit being a basket case :doh:

Why a 3 gauge pod when you could have a 4 gauge pod :D

Why a 3 gauge pod when you could have a 4 gauge pod :D
LOL..... Rob that means I'd have to push my luck that much more with momma for one more guage lol........ Hell I just want my truck fixed & I'd be satisfied.

THIS......................









http://www.powerstrokenation.com/photopost/data/500/medium/drinkwater.jpg

:eek::drool::postwhore2::whs:

Think that pretty much sums it up haha...

Yo Paul, I need 2 of your 4 guage pods and one of those bumpers when you finally get your hands on them. Hit me up w/ pricing on the guage pods.

do they make twin turbo kits?

do they make twin turbo kits?

Im sure if you contacted places like Swamps, DI, BDP, Truck source, Empire, WOP and Unlimited Im sure they could build you a kit. But you need supporting mods.

If Paul is getting us all Christmas presents I will take his Dad's new truck!!! LOL

If Paul is getting us all Christmas presents I will take his Dad's new truck!!! LOL

bull chit I already called dibs on that.

Im sure if you contacted places like Swamps, DI, BDP, Truck source, Empire, WOP and Unlimited Im sure they could build you a kit. But you need supporting mods.

:whs: You going to be looking at $6k-10k when built for JUST the turbos & piping. The supporting mods (studs, springs, injectors, tuning, labor for pulling the engine to install the bung on the oil pan) aren't included in that price. Compounds are big money, gotta pay to play.

here you go a obs with twins on it already
1997 Ford Twin Turbo Pulling Truck - Powerstroke Nation (http://powerstrokenation.com/forums/showthread.php?t=79840)

how about a 94.5-97 XLT OBS PSD CCLB 4x4 w/ manual locking hubs, one that has not been beat to hell and back/driven to hell and back, for less than 4k? I'm tired of my F-250 getting stuck in the mud.

oh damn does anybody besides wop have twins in there obs truck

oh damn does anybody besides wop have twins in there obs truck

see post #107

oh damn does anybody besides wop have twins in there obs truck

Or you could read my post and youll see what companies could build ya one.


There are a few members on the site that have twins in their obs truck but not many.

thats sick rob what u got in your truck

thats sick rob what u got in your truck

:confused::confused:



LOL I dont have twins. Mine is bone stock.


But you need to have the supporting mods before you do twins.

no no i ment what mods do u have done to your truck as it sits now

oh oh nvm i read to fast didnt see the stock part

no no i ment what mods do u have done to your truck as it sits now

oh oh nvm i read to fast didnt see the stock part

It might help if you took the time to actually use comma's, period's, question mark's and other form's of punctuation. Because then I would have known that you were asking a question.

yup thats my fault i ment to ask what mods your truck has now as it sits

Yup, thats my fault I ment to ask what mods your truck has now as it sits.

Fixed it for you.


Enough of the derail.

thanks, lol

Fortunately, not too many for me just the rims.

I want money for x-mas so i can buy want i want for my stroker!!

ic tubes, hpop,d66, and electric fuel. i wont get too crazy like everyone else lol.. thas all i need.

what happen to santa.

what happen to santa.

:whs:

Whaddaya mean what happened to Santa?? Like the song says "he knows if you've been bad or good".....

Not even a lump of coal.....wow....whadja doo or not do ahem!

5'2" Blonde, nice rack, 110-120lbs, doesn't mind me working on trucks or in the barn!

LOL!!!

THIS......................









http://www.powerstrokenation.com/photopost/data/500/medium/drinkwater.jpg

She never shoued up...... :shrug::shrug::shrug: