08-17-2009, 02:29 AM
I want to hook up a high idle to my upfitter switches. Ive heard of guy tapping into their BCP ( Battery Charge Protect)circut can anyone tell me what this looks like is it a wire or what?
08-17-2009, 02:32 AM
i hooked number 4 upfitter switch to the pto wire underneath the dash, they are both right below the steering column i just used a butt connector and tied the two together, they are both labeled.
08-22-2009, 03:31 PM
If you hook it to the battery one, from what I understand is the idle will change depending on the load. So I hooked mine to the PTO wire.
08-22-2009, 05:41 PM
I did the BCP on mine to switch 3 since it was the lowest amperage switch. on tds their is a sticky that tells you how to do it and what to look for.
How to: Elevated idle control for 2008 diesels - Diesel Forum - The Diesel Stop.com (http://www.thedieselstop.com/forums/f35/how-elevated-idle-control-2008-diesels-213876/)
thats what i used for instructions.