genie144
06-12-2009, 02:13 AM
So I have a question regarding boost numbers. I have the following:
H2E w/19cm
Hybrid (Don't know Flow)
6.0 Intercooler
Stealth Big Oil
Electric Fuel System
I am running Swamps Tuning, specifically TDE1_FME_XTR_D.
Assuming everything is functioning correctly, what kind of boost numbers would you expect me to see?
Sam
powerstrokenstang
06-12-2009, 02:28 AM
40-42, if normal 230-250cc. obviously 300+ will be a lil diff.
genie144
06-12-2009, 02:32 AM
My assumption is 230ish...
Sam
powerstrokenstang
06-12-2009, 02:40 AM
mine are 240cc and i got about 42 w/ 80% and 200% nozzles.
matthewd11
06-12-2009, 02:43 AM
235cc with .008 nozzles, the most i have seen is about 47-48 with a 71/71/17 h2e.
Average of around 45. thats with swamps drag 3 b file on PMT1 programming strategy.
genie144
06-12-2009, 03:54 AM
Hmmm... I know I need to get my fancy pump on and change a fuel filter, but I am only seeing ~30lbs. I haven't had a chance to take it to the track or dyno it. By the time I am hitting 30lb I run out of speed limit...
Sam
CNDiesel
06-12-2009, 05:21 AM
235cc with .008 nozzles, the most i have seen is about 47-48 with a 71/71/17 h2e.
Average of around 45. thats with swamps drag 3 b file on PMT1 programming strategy.
What % larger is that then stock?
I got those in in mine but there .0085 (just woundering)
But you should be over 40lbs of boost.
powerstrokenstang
06-12-2009, 03:59 PM
the 71mm comp wheel makes a big diff in numbers though. i have seen 50 w/ my 71/76/19.
MidTennPSD
06-13-2009, 12:53 AM
With mine I saw 50psi on the dyno when it had 238's with 100% nozzles in it. That was a 66/76-17cm.
ParkerFly
06-13-2009, 04:26 AM
With mine I saw 50psi on the dyno when it had 238's with 100% nozzles in it. That was a 66/76-17cm.
What kind of intercooler were you running?
Justin
MidTennPSD
06-13-2009, 04:47 AM
6.0 lol. The thing is a trooper lol. Ive been halfway trying to find a metal tanked 7.3 lately but hadnt yet.