bryan rittenhouse
06-04-2009, 10:19 PM
hey guys im lookin at doing my fuel system and i was wondering what series aeromotive reg. you guys used in yours. thanks for any info. bryan
smokyred
06-06-2009, 04:35 AM
I'm not running an Aero regulator, but my Fuelab regulator is very similar and I just picked the one they specified for their pump. I'd use whatever they recommend for the A1000.
Dave
AlaskaRedneK
06-06-2009, 04:47 AM
Im using the Areomotive 13109 (Red top, alluminum colored bottom) but I think any of the EFI ones will work. The only difference that I have noticed is the inlet outlet ports on them. the one that I am running is -6 all the way around.
-Matt
bryan rittenhouse
06-06-2009, 04:18 PM
thanks guys that will be very helpful
wynndaddy
06-06-2009, 09:35 PM
Im using the Areomotive 13109 (Red top, alluminum colored bottom) but I think any of the EFI ones will work. The only difference that I have noticed is the inlet outlet ports on them. the one that I am running is -6 all the way around.
:whs:
smokyred
06-06-2009, 10:22 PM
I should have said that before, make sure to get one with -6 ports.
Dave
Powerstroked162
06-07-2009, 11:21 PM
Call DI and get one from David
Cowboy Steve
Aljay
06-07-2009, 11:23 PM
Im using the Areomotive 13109 (Red top, alluminum colored bottom) but I think any of the EFI ones will work. The only difference that I have noticed is the inlet outlet ports on them. the one that I am running is -6 all the way around.
:whs:
You have to use the EFI reg. as the other one for carbed use will not handle the 65 psi we need to long.