|
|
Slated4Greatness 11-08-2007, 04:07 PM My block cracked number 6 cylinder and I am parting out the engine.
All of this is being removed from my 2000 7.3L engine.
Complete QSSB Kit:
(1) WOP QSSB turbo w/Mount
(1) ITP Regulated return for H2 setup
(1) H2 Y-pipe for QSSB / H2E
(1) Set IC tubes (Powdercoated Silver vein) for QSSB/H2E
(1) Set H2E Up pipes
(1) Down Pipe
(1) Set Dieselsite upgraded IC boots for QSSB/H2E setup - $2000
Complete "Modified" AFE Stage II (fits H2 sytle turbo):
(1) AFE Stage II
(1) ITP Jat 99 Tube (adapts AFE Stage II to QSSB or H2E) -$450
HPOP Reservoir - $50
Fuel filter housing -$50
(2) sets of valve covers -$50 per set
(1) Oil pan -$50 No rust AZ truck
(1) IPR -$100
(1) Set of exhaust manifolds -$75 No rust here either
(2) water Pumps - $50
(1) PS2000 Propane kit - Not used on this engine it was from previous engine. -$350 No tank unless local.
(1) Autometer 2 guage pod -$20
(1) Autometer 0-35lb Phantom II boost guage -$25
All the various sensors and such.
Fast_Ashley 11-08-2007, 04:12 PM How much for the Stealth?? Does it have pumps??
How much for the studs??
How about a total price on the QSSB.........
-Ashley
DarkShadowDiesel 11-08-2007, 04:40 PM sorry to hear about that, that's no good :doh:
how much for the fluidampr and how many miles are on it?
thanks,
chase
blk99 11-08-2007, 05:26 PM You say the AFE II is modified? What is modified on it? can it work with the stock turbo like a normal AFE II? Price?
Thanks
~Jim
fbilly420 11-08-2007, 06:09 PM how much for the qssb and the goodie for the set up?
Fast_Ashley 11-08-2007, 07:41 PM The big oil and the QSSB are already sold:doh::doh::doh:
Before I could get my hands on them.........
Cppr_Busa 11-08-2007, 11:56 PM How much for the fass?
Slated4Greatness 11-09-2007, 04:45 PM QSSB is available again. No funds from buyer.
blk99 11-09-2007, 04:52 PM How much for the AFE II? what is "modified" on it? would it work with stock?
Thanks
~Jim
Strictly Diesel 11-09-2007, 04:57 PM No, it won't work with Stock. It was modified to use my H2E intake pipe, which required cutting a section of the plastic tube off. That's why it's being offered WITH the ITP intake tube and not separately.
Slated4Greatness 11-10-2007, 07:20 PM You need a QSSB or H2 turbo to run the AFE that I have.
silverslug 11-11-2007, 03:20 AM how much for the studs ?
Short Bus 11-11-2007, 04:20 AM How much for the fass?
Slated4Greatness 11-11-2007, 04:58 PM Studs are sold.
PM sent Luke
psdmax 11-12-2007, 11:51 PM How much for the Fluidampener? I'm interested, Ben
Slated4Greatness 11-13-2007, 01:52 AM Hi Ben,
Sorry but the dampr is gone.
strokin_hard 11-13-2007, 05:12 AM what parts do you have left?
Slated4Greatness 11-13-2007, 06:33 PM what parts do you have left?
Items sold:
Stealth, additional lines
Dampr
Head studs (funds not received yet)
HPOP reservoir
1 Starter
1 PS pump
1 AC Compressor
DP F5
All other items remain for sale.
psdmax 11-15-2007, 01:16 AM Hi Ben,
Sorry but the dampr is gone.
I'm allways a day late.... :confused:
DeadStroke 11-15-2007, 02:10 AM How much for the QSSB, studs, FASS?
CSIPSD 11-15-2007, 08:24 PM Shoot me a message on the Turbo kit please!
PowerstrokeJunkie 11-15-2007, 09:34 PM The injectors, are they true B codes, have they been touched inside, and the flow cc?
gregrob 11-18-2007, 02:41 AM The injectors, are they true B codes, have they been touched inside, and the flow cc?
They are Industrial Stage III Hybrids not B codes
99powerstroke 11-18-2007, 04:09 AM how much for the injectors?
Slated4Greatness 11-19-2007, 05:42 PM PM sent.
02Bluestroker 11-19-2007, 07:29 PM how much for the rods?
Slated4Greatness 11-20-2007, 03:29 PM PM's sent and availability updated.
Slated4Greatness 12-12-2007, 04:24 PM The list has been updated and inlcudes new items I found while cleaning.
Please note the Christmas special on the injectors and turbo!
slowleak 12-12-2007, 04:28 PM i wish i had the moeny for the injectors :doh:
PTSUPERD 12-12-2007, 04:32 PM hmm...how long would it take you to get the oil pan "on the way" ?
time crunch...
Slated4Greatness 12-12-2007, 04:34 PM I can ship the pan tomorrow if you want. It will just take a couple to clean it up and then find a box big enough.
Slated4Greatness 12-12-2007, 04:34 PM i wish i had the moeny for the injectors :doh:
I'm open to interesting trades as well.. PM me.
bosco443 12-14-2007, 02:53 AM My block cracked number 6 cylinder and I am parting out the engine.
All of this is being removed from my 2000 7.3L engine.
Industrial stage 3 injectors with 0.009" EDM'd nozzles -$1250
Complete QSSB Kit:
(1) WOP QSSB turbo w/Mount
(1) ITP Regulated return for H2 setup
(1) H2 Y-pipe for QSSB / H2E
(1) Set IC tubes (Powdercoated Silver vein) for QSSB/H2E
(1) Set H2E Up pipes
(1) Down Pipe
(1) Set Dieselsite upgraded IC boots for QSSB/H2E setup - $2000
Complete "Modified" AFE Stage II (fits H2 sytle turbo):
(1) AFE Stage II
(1) ITP Jat 99 Tube (adapts AFE Stage II to QSSB or H2E) -$450
HPOP Reservoir - $50
Fuel filter housing -$50
(2) sets of valve covers -$50 per set
(1) Oil pan -$50 No rust AZ truck
(1) IPR -$100
(1) Set of exhaust manifolds -$75 No rust here either
(2) water Pumps - $50
(1) PS2000 Propane kit - Not used on this engine it was from previous engine. -$350 No tank unless local.
(1) Autometer 2 guage pod -$20
(1) Autometer 0-35lb Phantom II boost guage -$25
All the various sensors pulleys and such.
pm'd> b.
Slated4Greatness 12-14-2007, 02:48 PM PM returned.
CSIPSD 12-14-2007, 03:49 PM What about a trade for a set of stage 2 swamps? 175/173's... Hell I'll trade you them and the hybrids I am running now...
Slated4Greatness 12-15-2007, 10:48 PM PM sent Joe.
Oilfield_Digger 12-15-2007, 11:02 PM what all is left?
matthewd11 12-17-2007, 12:51 AM Do you have pics of the boost gauge and pod? If you could send pics to matthewdemers@hotmail.com that would be great! Thanks!
Slated4Greatness 12-17-2007, 09:34 PM what all is left?
Look up a few posts and the list is there. I have commitments to buy on the injectors and turbo kit but the rest is still for sale.
Slated4Greatness 12-17-2007, 09:35 PM Do you have pics of the boost gauge and pod? If you could send pics to matthewdemers@hotmail.com that would be great! Thanks!
I can get pics tonight and send them in the morning.
matthewd11 12-18-2007, 01:24 AM I can get pics tonight and send them in the morning.
thanks! all electrical wiring/connections/boost line/fittings included correct?
Slated4Greatness 12-18-2007, 02:45 PM Yes, all the connections are included. I stepped up to a 0-60lb. gauge and I simply replaced the gauge in the A-Pillar leaving all of the hose, and other mounting items in the box and brand new. Just the gauge has been used.
Slated4Greatness 12-20-2007, 02:45 PM UPDATED LIST
My block cracked number 6 cylinder and I am parting out the engine.
All of this is being removed from my 2000 7.3L engine.
Complete QSSB Kit:
(1) WOP QSSB turbo w/Mount
(1) ITP Regulated return for H2 setup
(1) H2 Y-pipe for QSSB / H2E
(1) Set IC tubes (Powdercoated Silver vein) for QSSB/H2E
(1) Set H2E Up pipes
(1) Down Pipe
(1) Set Dieselsite upgraded IC boots for QSSB/H2E setup - $2000
Complete "Modified" AFE Stage II (fits H2 sytle turbo):
(1) AFE Stage II
(1) ITP Jat 99 Tube (adapts AFE Stage II to QSSB or H2E) -$450
HPOP Reservoir - $50
Fuel filter housing -$50
(2) sets of valve covers -$50 per set
(1) Oil pan -$50 No rust AZ truck
(1) IPR -$100
(1) Set of exhaust manifolds -$75 No rust here either
(2) water Pumps - $50
(1) PS2000 Propane kit - Not used on this engine it was from previous engine. -$350 No tank unless local.
| |
|
| |