http://video.competitiondiesel.com/video/cb3a462f-7c16-4775-af0d-999d00c731b6.htm
Clutch held for about 100' of that 325', seriously over powering it now. Workin with Peter at South Bend to get that fixed up, 3 discs should hold right?:rockwoot:
gregrob 09-03-2007, 04:17 PM NICE BEANER! :D
I did see some sparks at the end, poor clutch. :(
3 disks :rockwoot:
mech2161 09-03-2007, 04:17 PM That's cool! Plenty of sparks from the clutch at the end. Can't wait to hear more about the new clutch.
mech2161 09-03-2007, 04:18 PM Hey Beaner no bounce? What's up?
mattymx 09-03-2007, 04:18 PM Nice run even with the slipping clutch. Was that a 3rd gear 4low pull?:rockwoot:
greenbeast 09-03-2007, 04:19 PM Wow nice pull!! Nice to see a PSD pull that well!!! :ford:
gregrob 09-03-2007, 04:44 PM Wow nice pull!! Nice to see a PSD pull that well!!! :ford:
Not a PSD :(
Ya listen closer, thats no PSD LOL.
Kev, last peices of the puzzle was moving the hitch forward 14"s and doing some simple front bars, absolutly no bounce now. Been airing the air bags past 100psi and leaving 1" of travel with the blocks too. I will let ya know how the triple does and what it takes to do it. Gonna have to move tranny back 3/4" and get a custom input shaft.
Matt- thats 4th gear lo on the stick, what the Dodge guys would call 5th lo. When I get a clutch I am gonna go to 2nd hi on the stick which is accully 3rd.
mattymx 09-03-2007, 10:37 PM Thanks ryan. I have been tinkering with the idea of pulling and just trying to see what the manuals are doing.
greenbeast 09-03-2007, 10:51 PM :lookaround::rolleyes: I did not have the sound on. My 3 week old son was sleeping, i should have turned it up a little!!:D
HotRodTractor 09-05-2007, 11:27 PM Yeah Beaner went cummins on us..... now I can't get him to come up the Washington Courthouse to the DHRA event because he is scared a PSD might beat him. :poke:
bigrpowr 09-06-2007, 12:24 AM tell peter at SBC thanks for the cocktails in vegas!! that guy is cool. congrats ryan. thats awesome u got it figured out!!
Yeah Beaner went cummins on us..... now I can't get him to come up the Washington Courthouse to the DHRA event because he is scared a PSD might beat him. :poke:
Ha Ha- no scare here. No clutch yet and too far for me, gonna shoot for Houston but not sure if I can make that one either.
Doodie 09-06-2007, 01:04 AM Nice Ryan.
HotRodTractor 09-06-2007, 01:23 AM Ha Ha- no scare here. No clutch yet and too far for me, gonna shoot for Houston but not sure if I can make that one either.
I wish I had the time and money to go to Houston. Sounds like it will be a good time.
Jason
Murphy's Law 09-10-2007, 06:34 PM Hey Bean I thought you were supposed to be the PowerStroke specialist??:shrug:
Not to impressed since its a Cummins swap.:lame:
Did you give up on the Strokers or what.:shrug:
Everyone is making big power with the Cummins so I guess you just followed along now.:poke:
I am not trying to ba a smartazz but I am disapointed in you for following everyone else and taking the easy way out. If I am going to drive a Ford then it is going be a PowerStroke and if I want a Cummins then I will have to buy a Dodge. NOT!!!
:ford::ford::ford: = PowerStroke PowerStroke PowerStroke
BTW, I am just giving you a hard time.:D
All kidding aside though that was a sweet pull....:redspotdance::redspotdance:
Sapps 09-10-2007, 08:37 PM :hehe:
Hey Bean I thought you were supposed to be the PowerStroke specialist??:shrug:
Not to impressed since its a Cummins swap.:lame:
Did you give up on the Strokers or what.:shrug:
Everyone is making big power with the Cummins so I guess you just followed along now.:poke:
I am not trying to ba a smartazz but I am disapointed in you for following everyone else and taking the easy way out. If I am going to drive a Ford then it is going be a PowerStroke and if I want a Cummins then I will have to buy a Dodge. NOT!!!
BTW, I am just giving you a hard time.:D
All kidding aside though that was a sweet pull....:redspotdance::redspotdance:
Yes I know I am a traitor, took easy way out, cheater, low life, ..........
But what is better, second place in a PSD or first place in a Ford with some other motor? I will take the first place thanx. :gun:
I catch alot of hell from doin it since I am a PSD shop but I was in the mood for something different and it was a business decision more then a loyalty thing.
Next year it will step up a notch more then what it is now.:ford::poke:
mech2161 09-10-2007, 11:41 PM I'm stuck in that second place rut!:stupid::hehe:
Charles 09-11-2007, 02:49 AM I've just gotta say that with all the bugs and chit in this room right now after the door was left open that Bug on Sapps sig got me.....
I swatted twice :D
LOL
Sapps 09-11-2007, 01:20 PM I've just gotta say that with all the bugs and chit in this room right now after the door was left open that Bug on Sapps sig got me.....
I swatted twice :D
LOL
:rockwoot: :D
JohnDeere9610 09-14-2007, 09:29 AM Bean you aleast need a decent runnin psd. Sense you are a psd shop. well wait a sec you do have sapps so I guess its cool. I would ragther watch a obs than a sd anyways.:swordfight::ford:
Tim @ P.I.S. 09-15-2007, 01:28 AM Ryan, what kind of power is that thing laying down???
Nice pull.
Not sure Tim, it was 589 with a single pump and just a Smarty, I now have dual pumps and stacked a TST so I have ton more fuel now. I would say its over 700hp some, will hit a dyno sometime soon.
Short Bus 09-15-2007, 04:48 PM you still running the 76mm charger?
Sapps 09-16-2007, 01:16 AM Yep good charger!
Ya luke, its 76 bushed down to 72 for pulling.
|